7 Genius Ways to Improve Miter Saw Dust Collection

Those reviews are all over the net, but these are the only two saws I own, so lets compare them! The Festool Kapex is considered the ultimate miter saw, reviewers and Festool fans have been saying it for years. I used it almost every day until this last summer when I sold it on Craigslist. The Kapex used in this review belongs to my shop mate and is only about two years old. The Milwaukee is brand new to the market, it has only been out since the middle of October. A few early reviewers said it was too flexible and tended to cut off angle, we have had no issues with flex, or cut quality. First let me explain my experience with the Festool.

In every issue you’ll find…

Power miter saw[ edit ] A motorized miter saw A power miter saw, also known as a chop saw or drop saw, is a power tool used to make a quick, accurate crosscut in a workpiece at a selected angle. Commonly used for cutting of molding and trim. The power miter saw was invented by Ed Niehaus, a tool designer for Rockwell, in The miter saw showcased several innovations still found today: Rockwell did not patent the design, leading to a large number of manufacturers and innovation improvements.

The workpiece is typically held against a fence, which provides a precise cutting angle between the plane of the blade and the plane of the longest workpiece edge.

This unit attaches firmly to the saw, replacing the right angle used for the bag attachment. I consider the dust collection for this sliding compound miter saw along with the saw’s accuracy a major plus.

Since this port is designed to work with a clamp-on bag, the majority of the ports will be much smaller than the hose and fittings of a standard shop vacuum. If the size of the port is smaller than the vacuum hose, it will be necessary to purchase an adapter. Attach this adapter to the dust port of the miter saw after removing the dust collection bag. Fit the vacuum hose to the adapter and ensure that the saw can move through all of its angles and that the head and arm move freely.

Be sure that the hose will not pull free during operation, resulting in sawdust entering the air of the workspace. It may be necessary to extend the vacuum hose if it limits the movement of the saw. Turn on the vacuum before making the cut so that it actively extracts dust through the port while sawing.

Be aware of the amperage draw of both the saw and the vacuum if they are going to be operated simultaneously on the same circuit. If the combination will overload the circuit, do not proceed. Plug the vacuum and saw into different circuits before using them in combination. The design of the miter saw, however, does not make it easy to capture all of the dust through the port, and much can still escape. To compensate, many individuals cover the miter saw with a shroud or hood that surrounds the back of the saw.

The Best Band Saw – Complete Buyers Guide & Reviews

Table saw or circular saw Jigsaw Step 1: Draw Arc I wanted the dust hood to curve around my miter saw to better capture dust. However, I wanted it to look symmetrical and fit the width of my boards.

CUTS THROUGH: Wood, Nails, Screws, Durock, Plaster, Shingles and More The AX™ with Carbide Teeth, engineered to deliver long life in the toughest applications while being the fastest carbide-tipped recip saw blades on the market.

We created a helpful list of what features we think are the best on the W from Shop Fox. This is a two-horsepower single-stage motor that comes already wired and ready to set up. It needs a amp, V circuit to run properly. While steel is durable and can last for years, it isn’t nearly as dependable as the cast-iron table that comes with it. This heavy-duty cabinet can stand up to daily use without breaking down. While it weighs more than you might expect, you can easily move the cabinet because it has a wheel located on each corner of the base.

Those wheels also lock into place to keep the cabinet from rolling or moving while cutting. The crank wheel on the front lets you lift and lower the blade before you cut and whenever you need to make an adjustment. A second crank handle sits on the end. Also on the front is a power button that brings it to life and an emergency stop button.

You can hit this button with a free hand to stop the blade in place.

Best Table Saw Reviews and Buying Guide 2018

With an innovative articulating arm straight out of a transformers movie, the neato factor of this unit alone has stirred more interest in carpentry circles than Obama-Care has in rest homes. If you want technical jargon, read Popular Mechanics. We did some heavy cutting building a redwood pergola; we performed some fine finish work on a fireplace mantel; and we chewed up more than a couple board-feet of Sapele for an entry door unit. I can tell you right away, this saw is a big step up from my old slider.

Not many professionals replace a saw just because a new one came out.

I was excited to work with the new Bosch Axial Glide “folding” miter saw (AGS), especially since I’m still enjoying a prosperous relationship with its older brother—the

Types of Miter Saws Basic miter saws Basic miter saws are lightweight and relatively inexpensive. This saw is used only for simple projects. Projects include cutting trim and cross cuts. Basic miter saws provide no bevel options. Basic miter saws tend to be highly accurate compared to advanced miter saws. The simplicity of this type of saw makes it practical for beginners and casual wood workers.

Basic miter saws are practical for: Compound miter saws Compound miter saws can make straight, miter and bevel cuts. Compound models come in two options. The single mode option is lightweight and generally less expensive. If you need to make cuts on either end of the wood piece, you would need to turn the board to replicate the cut. Dual bevels tilt in both directions.

Questions tagged [miter-saw]

My assessment is based on the combination of power, quality build, cut capacity, and an effective mobile solution. The higher blade speed seems to have improved ripping quality slightly. The rack and pinion fence rails are the key to this saws accuracy and overall performance. The fence is easy to adjust and stays parallel to the blade.

The unique fence design rides on rails at both the front and back of the saw, eliminating the possibility of fence drift.

Bosch CM10GD Inch Dual Bevel Glide Miter Saw The Bosch CM10GD inch Dual-Bevel Glide miter saw provides power and versatility. Thanks to the compact design and the innovative Axial-Glide System, this unit provides smooth cutting control in up to 10 inches less workspace than other miter saws, so users are able to work productively in hallways and other tight quarters.

Power miter saw[ edit ] A motorized miter saw A power miter saw, also known as a drop saw, is a power tool used to make a quick, accurate crosscut in a workpiece at a selected angle. Commonly used for cutting of molding and trim. The miter saw showcased several innovations still found today: Rockwell did not patent the design, leading to a large number of manufacturers and innovation improvements.

The workpiece is typically held against a fence, which provides a precise cutting angle between the plane of the blade and the plane of the longest workpiece edge. A primary distinguishing feature of the miter saw is the miter index that allows the angle of the blade to be changed relative to the fence. Types[ edit ] There are several types of miter saws: Compound-miter saw – Compound miter saws have the added benefit of being able to rotate the blade and head at a variety of angles, allowing for the cutting of angles other than 90 degrees.

Sorry, we’re unable to complete your request

Additional flooring tools for rent in Erie include: It includes adjustable four position handle for easy use. Our carpet scrubber has a commercial grade vacuum, brush, and pump.

Need to fix your DW Type 1 /2 Miter Saw? We have parts, diagrams, accessories and repair advice to make your tool repairs easy.

Thoughts of professional uses and workshop chores were the first thing on our mind. After using the saw for a few large projects, I am very impressed with the power and run time. The precision and accuracy are also two items that make this saw stand out in a small 32 pound package. This is not a cheap saw, but in comparison to other professional use cordless tools, it is not very expensive either. This saw might have taken some time to come to market and it was worth the wait as Dewalt got it right.

The saw spins at 3, rpm at no load and it slows slightly when under load. We started out cutting slower because mentally we all expected that we would need to with a battery operated saw. After we were very comfortable with the saw we worked to try to bog the saw or stop it.

Bosch GTS 10 J 254mm Table Saw

WORX Pegasus work table and sawhorse — Good for Handling Heavy Loads Promising you versatility in your work, the WORX Pegasus is an innovative workstation, which changes easily and quickly from a table supporting up to pounds to a sawhorse supporting up to 1, pounds. You can even join it to other Pegasus tables in case you want a bigger surface area, and a dual clamp system works to keep all objects in place as you work though these clamps have issues with fragility.

The stand comes with two bar clamps that you can adjust easily and slide along the tabletop channels. These will act as a second set of hands and hold straightedge materials for varnishing, cutting, and other tasks. You can rearrange the four holding pegs across the table in order to secure irregular objects or round-shape objects. In addition, there is a lower shelf holds your tools, while a power strip keeps all your things accessible and neat.

Band saw size determines the stock size it will handle and the size is based on two dimensions. First is the distance between the inner edge of the blade and the throat of the saw.

Keep sawdust contained and out of your lungs! Last week, I showed you my dust collector setup and how I upgraded it for better performance. Miter saw dust collection is tricky because it spews sawdust in every direction, making it hard to contain. These genius solutions will hopefully inspire you to get that miter saw mess under control! This post contains affiliate links. Purchases made through these links may earn me a small commission at no additional cost to you.

Shop Internationally at Sears

There was plenty of dust in the air and around the saw, though. So I decided to just hook up my shop vac to the dust port. Should be easy, right? Well my shop vac has a 2.

Table saws are an essential tool for anybody who builds things, either as a profession or in a do-it-yourself capacity around the home. Choosing the best table saw for the money depends on the type of work you intend to do and the budget you have.

You may find that you plan on using one outside when the weather is nice or on a job site when doing work for others. Moving one of the heavier ones is almost impossible, but Delta designed this model with portability in mind. This model is so lightweight that you can actually take it anywhere you go. It’s lightweight enough for one person to both carry and set up. You’ll no longer need to ask for help before getting to work.

Delta has you covered with this model because the manufacturer includes a fold-down stand. This stand actually folds down from the bottom and pops into place that lets you get off the ground.

Miter saw dust collection